Washer Repair in Hanford, CA

Washer not draining, spinning or filling? We fix top load and front load washers and tell you straight if yours is worth saving.

Red front load washer taken apart down to the drum
Draining problems

Why Won't My Washer Drain?

Water left sitting in the tub is one of the most common calls we get. Most of the time it comes down to a clogged drain pump filter, a sock or coin stuck in the pump, a kinked drain hose or a pump motor that has burned out.

On front loaders, a bad door lock or lid switch can also stop the cycle before it ever pumps out. We test the pump, the hose and the lock so the right part gets replaced the first time.

Front load washer opened up for repair, drum and door boot exposed
Spin cycle

Washer Not Spinning or Banging on the Spin Cycle?

A washer that hums but won't spin usually has a worn drive belt, a broken motor coupler or a lid switch that no longer tells the control the lid is shut. One that bangs and walks across the floor often has worn suspension rods, shocks or tub bearings.

Bearings are worth catching early. The roar gets louder every week, and once a bearing lets go it can take the tub seal with it.

Top load and front load

What Usually Breaks on Top Load and Front Load Washers?

Both styles fail in their own ways. Here's what we see most on each one.

Top load

Top load washers

  • Lid switch and lid lock
  • Motor coupler and drive belt
  • Agitator dogs that slip
  • Water inlet valve that won't fill
Front load

Front load washers

  • Torn or moldy door boot seal
  • Door lock that won't release
  • Drain pump filter clogs
  • Noisy tub bearings
Repair or replace

Is My Old Washer Worth Fixing?

If the tub, the frame and the transmission are in good shape, a washer is usually worth a pump, a belt or a switch. A lot of older machines were built heavier than the ones on sale today, and they run a long time with the right parts.

If yours really is at the end of the road, we'll say so. You can also ask what we have in used washers and dryers before you spend money on a new one.

Before you call

What Should I Tell the Repair Tech About My Washer?

A few details help us show up with the right part:

  • Top load or front load
  • Brand and model number (sticker under the lid or around the door opening)
  • Any error code on the display
  • What it does: won't drain, won't spin, leaks, smells, won't start
Questions

Washer Repair FAQ

Why is my front load washer leaking from the bottom?

The usual suspects are a torn door boot seal, a drain filter cap that isn't seated, a cracked hose or a leaking pump. We trace the water back to where it starts before we replace anything.

Can an error code tell you what's wrong with my washer?

It points us to the right area, like draining or the door lock, but the part still has to be tested. Send us the code when you call and it saves time.

What if my washer isn't worth repairing?

We'll tell you before you spend anything. Ask about our reconditioned washers if you need one that works without paying new prices.

Reviews

What Customers Say on Google

Find Us on Google
Get in touch

Contact Us

Tell us what the appliance is doing and we'll get back to you with what it needs.